Sometimes it is a breaker that trips again two days after you reset it. Sometimes it is an outlet that stopped working and you cannot figure out why. Whatever tips it, the moment you decide to stop waiting and call is the right one. We handle the full range of electrical work for homes and businesses in Conway, from a single dead outlet to a panel replacement, and we are available every day from 6:30 AM to 8:30 PM.
Conway is a town where older homes sit alongside newer construction, and the electrical work that comes out of that mix is varied. Homeowners dealing with wiring that has not been touched in decades, property managers keeping rental units up to code, and businesses that need circuits added or updated all call for the same thing: someone who can scope the job honestly, price it before starting, and get it done right. We cover Conway and the surrounding area.
Call (321) 341-6429 to get started.
A home built before central air conditioning became standard was probably wired for a fraction of the electrical load it now carries. When the panel cannot keep up, the symptoms show up as tripping breakers, lights that dim when the AC kicks on, or a fuse box that has run out of room entirely. We handle 100-amp to 200-amp service upgrades, fuse-to-breaker conversions, and subpanel installation where a detached garage or added space needs its own feed. The load calculation comes first, so the new panel is sized to what the property actually needs.
Hurricane season in this region is not a background concern. An extended outage after a storm can mean days without power, and a generator connected through a proper transfer switch changes that picture significantly. The transfer switch is the piece that matters most: it keeps the generator from back-feeding the utility line and lets the generator power the home's circuits directly. We handle the wiring, the transfer switch installation, and the connection to the panel, and we confirm the circuit is sized to match the generator's output before the job is done.
A panel where half the breakers are labeled "misc" or not labeled at all is a problem the moment you need to isolate a circuit quickly. We trace and document every circuit, update the panel directory, and confirm that each breaker is correctly matched to the load it protects. For older Conway homes where additions and updates have happened over the years without full documentation, this work gives the homeowner a clear picture of what is actually running through the walls.
A ceiling fan that moves air effectively reduces how hard the cooling system has to work, and in Central Florida that matters year-round. We install new fans, replace old ones, and handle the wiring in rooms where no ceiling box currently exists. If there is no junction box rated for a fan, we install the correct one before the fan goes up. That step is not optional: a fan hung from a box rated only for a light fixture is a safety issue, not a shortcut.
Smart doorbells, hardwired data runs, and low-voltage wiring for security cameras and audio systems all require the same care as line-voltage work, even if the stakes feel lower. We handle doorbell wiring and replacement, structured data cabling, and low-voltage rough-in for new construction or renovation projects. Getting the rough-in done before the drywall goes up is the right time, and coordinating that with the other trades on site is part of the job.
On a renovation or an addition, the electrician is not the last trade through the door. Rough-in wiring has to happen before insulation and drywall, and the panel work needs to be complete before the inspector signs off on anything downstream. When the sequence is not planned, the result is walls that have to come back open, delays that push every other trade back, and work that costs more than it should have.
We work with general contractors, homeowners managing their own renovations, and property managers coordinating work across multiple units. The conversation about timing starts on the first call, not after the framing is already up. For a bathroom addition, a kitchen remodel, or a home extension in Conway, knowing when the electrician needs to be on site relative to the plumber and the drywaller keeps the whole project moving.
For commercial build-outs and tenant improvements, the same principle applies at a larger scale. A business that has to stay open during a renovation needs the electrical work phased so that no section of the building loses power at the wrong time. We plan that sequence before the work starts, not around it.
Matching new work to what is already in a home matters more than it sounds. A Conway house built in the 1970s may have wiring, panels, and fixtures that use components no longer stocked at a supply house. When a replacement part has to be ordered rather than pulled from a shelf, the job takes longer, and the customer needs to know that before we start, not after.
For outlets, switches, and fixtures, the goal is a clean match to what is already there: the same style, the same finish, the same plate size. Where a component is genuinely obsolete and a direct replacement is not available, we explain the options. Sometimes a like-for-like swap is possible with a current product. Sometimes the right answer is updating the surrounding wiring to accept a modern fitting. Either way, you hear about it before any work is done.
The same issue comes up with panel components. Breakers are not universal, and a panel that uses a discontinued breaker line may require a compatible replacement from a secondary source or a conversion to a current panel. We confirm parts availability during the scoping call where the situation is likely to come up. Anybody planning ahead in Conway can start with the list of electrical services we handle.
The price for electrical work is not fixed before we understand what the job involves. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote in one direction or another. A tripping breaker that turns out to be an overloaded circuit is a different job from one that points to a wiring fault behind the wall. Both start with the same symptom.
When you call, we walk through what you are seeing and what the property involves. That conversation gives us enough to scope the job and give you a price before anything is scheduled. The scope of the electrical work is priced before it starts, so there is nothing to figure out after the fact. If what we find on site changes the picture, we explain that before the work changes.
No pressure and no gimmicks, just safe, solid wiring and a clear answer about what the job covers.
Call (321) 341-6429 and we will go through it with you.
We know schedules shift, so we keep booking flexible, with availability every day from 6:30 AM to 8:30 PM. That window covers evenings and weekends, which is when most homeowners can actually be at the property. For property managers and landlords, we can work around tenant schedules and confirm the timing in advance.
For problems that will not wait, we take short-notice calls and work them into the schedule when the situation allows. A partial power loss, a burning smell near the panel, or an outlet that is throwing sparks are not things to leave until the following week. Call and describe what is happening. We will tell you what the schedule allows and get it on the calendar.
For businesses that need to stay operational, we plan the work so that the disruption is as short as possible. That means knowing in advance which circuits will be affected, for how long, and what the sequence of work will be. Working here means getting the diagnosis right before the work starts, and that applies to the scheduling conversation as much as it does to the repair itself.
Call in the morning. Talk it through. Know the options by the end of the call.
We cover Conway and the communities around it, including Belle Isle, Edgewood, Pine Castle, Holden Lakes, and Orlando. Orange County properties throughout the area are in our range. If your address is nearby and you are not certain whether it falls within our coverage, call and ask before you schedule anything.
Electrical problems don't wait, and neither do we, so whether the property is in Conway proper or a few miles out, the call goes to the same place and the same process applies.
Rewiring requires opening walls and ceilings to run new wiring, and those openings need to be patched and repainted after the electrical work is done. We focus on the wiring and the electrical finish. Drywall patching and painting are typically handled by a separate trade, and we coordinate the sequencing so the walls are not closed until the rough-in is inspected.
We confirm the timing with whoever is managing the property before the visit is booked, so the tenant knows in advance when we will be on site and which circuits will be affected. For work that requires a circuit to be off for a period, we plan the sequence to keep that window as short as possible. The scope and the price are settled before anything is scheduled, so the property manager has a clear answer to give the tenant.
Responsibility for damage caused by another trade is a matter between the property owner and the contractor who caused it. We assess the damage and give you a price to repair it. If the damage creates a safety hazard, we treat it as a priority and address it before the circuit is put back into service.
Older homes in this area often carry wiring that has not been updated since the original construction, and the issues that come with that include undersized panels, outdated GFCI and AFCI protection, and aluminum branch-circuit wiring that needs remediation. We see these regularly and scope them honestly on the call. If what we find on site changes the picture from what was described, we explain that before the work changes.
Before any work is scheduled, you know what it covers and what it costs. That is how every job works, whether it is a ceiling fan installation, a panel upgrade, or a whole-home rewire.
Call (321) 341-6429 and we will walk through the scope on the call.
We are available every day from 6:30 AM to 8:30 PM. We answer the phone. We show up ready to work. We test before we leave.
For every town we reach, see our whole service area. We also take electrical work in: Orlando, Belle Isle, Edgewood, Holden Lakes, Azalea Park, Rio Pinar.
Below is a plain look at the electrical work we handle for homes and businesses in Conway and across Orange County. Each service is described by what it covers, who it fits best, and one practical detail worth knowing before you call. If a job you need is not listed or you are not sure which service applies, call us and we will walk through it with you.
| Type of Work | What the Job Involves | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Lighting Installation | Recessed LED fixtures, Outdoor security and motion lights, Under-cabinet and landscape wiring, Indoor fixture replacement | Homeowners renovating a room or adding exterior lighting for security | Outdoor lighting in Central Florida needs weatherproof fittings and GFCI-protected circuits to hold up against humidity and storm exposure. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Main panel replacement, Subpanel installation, Load calculations and service entrance work | Older homes adding EV chargers, AC loads, or modern appliances that exceed current panel capacity | Many Conway homes still carry 100-amp service. A load calculation on the call confirms whether an upgrade is needed before any work is scheduled. |
| Ceiling Fan Installation | New fan installation, Fan replacement, Junction box upgrade for fan support, Wiring in rooms without existing ceiling boxes | Florida households reducing cooling load or replacing an aging fan | A ceiling box rated for a fan is required before installation. If one is not already there, we install the right box as part of the same visit. |
Call (321) 341-6429 and we will walk through the job with you, confirm the scope, and give you a price before anything is scheduled.
(321) 341-6429