Commercial properties in Orlando generate a different kind of electrical workload than a single-family home. Restaurants running kitchen equipment around the clock, office suites turning over between tenants, warehouses adding circuits for new machinery, and property managers coordinating repairs across multiple units all need work scheduled around what has to stay operational. We handle that side of the work alongside straightforward residential calls, and we treat both with the same approach: scope the job on the call, price it before anything is scheduled, and get it done without disrupting more than necessary.
Residential work in a city this size comes with its own range. Older homes in established neighborhoods carry wiring that was never designed for today's loads. Newer construction shows up with different issues, often panel capacity that gets tested as households add appliances, EV chargers, and home office equipment.
We work across both, and the call to (321) 341-6429 starts the same way regardless of which one you are dealing with.
Older properties present a specific challenge when a component fails and the replacement is not a direct swap. Breaker panels from certain manufacturers have been discontinued, and the breakers that fit them are no longer produced. An outlet or switch that predates current code may not accept a modern device without changes to the box or the wiring behind it. We identify what is in place before recommending a fix, because the right answer depends on what the existing system can accept.
Where a part has to be ordered, we say so on the call rather than showing up and discovering it on site. That conversation covers what we know from the description, what we expect to find when we open the panel or pull the device, and what the lead time looks like if a component is not immediately available. Some repairs are completed in a single visit. Others involve a first visit to diagnose and a second to complete the work once the right part is in hand. We make that clear before either visit is booked.
Aluminum branch-circuit wiring and knob-and-tube systems both present situations where the fitting that would solve the immediate problem is not the right answer on its own. Connecting a modern device to aluminum wiring without the correct fittings creates a hazard, and a standard outlet replacement in a knob-and-tube circuit may not address the underlying condition. We identify the wiring type during the diagnostic, explain what it means for the repair, and give you a clear picture of what the full correction involves before any work starts.
A ceiling fan that wobbles, hums, or has stopped responding to its switch is usually a wiring or mounting issue rather than a failed motor. We check the junction box first, because a box that was not rated for a fan load will work loose over time and become a hazard. If the room has no existing ceiling box, we install one before the fan goes up. The circuit gets checked for proper grounding, and the fan is tested on all speeds before we leave.
Welders, air compressors, and larger shop tools draw enough current that running them on a shared circuit is a recurring problem. The breaker trips, the equipment runs below capacity, or both. The fix is a dedicated circuit sized to the equipment's actual draw, run from the panel to the outlet location the equipment needs. We size the circuit correctly from the start rather than leaving room for the same problem to return when the next piece of equipment is added.
A whole-home surge protector installed at the service entrance intercepts voltage spikes before they reach the circuits running through the property. In a region where lightning is a near-daily event during storm season, that layer of protection matters for appliances, electronics, and anything else connected to the wiring. The installation works alongside the grounding and bonding system already in place, and we confirm that system is solid before the protector goes in.
Aluminum branch-circuit wiring requires specific fittings and devices at every connection point to reduce the risk of overheating and arcing. We identify which circuits are aluminum, check the condition of existing connections, and install CO/ALR-rated devices and anti-oxidant compound where the connections are made. Where the wiring has deteriorated or where the scope of the problem calls for it, we discuss partial or full rewiring as part of the same conversation.
Knob-and-tube wiring was not designed for grounded circuits, and it was not designed for the loads a modern household puts on it. Insulation degrades over time, and the system has no ground conductor, which means standard GFCI protection cannot be applied the way it would be on modern wiring. We replace knob-and-tube circuits section by section or throughout the home depending on what the inspection turns up, and we explain the scope before any work begins.
For homeowners, finding a window that fits around work and family is the usual challenge. We are available every day from 6:30 AM to 8:30 PM, which covers early mornings and evenings when most contractors are not taking calls. For commercial properties and rental units, the scheduling conversation is more involved. A business that cannot shut down a section of the building during peak hours needs the work planned around when it can. A tenant who needs to be present for access has to be coordinated separately from the landlord who is booking the job.
We show up, and we keep you posted until the job is done. For multi-unit properties and commercial sites, that means the person who booked the work hears back after each visit rather than waiting to find out what happened. If the job runs longer than the original estimate because of what we find inside the wall or panel, we call before we continue, not after.
Electrical problems don't wait, and neither do we, so when a fault is affecting a circuit that cannot be left open, we work the schedule to get there as soon as the day allows. The call covers what is happening, what the likely cause is, and what getting there looks like given current availability. The specifics for a job like this are on the page that lists our electrical services.
The rate quoted on the call is based on what we know at that point. What actually moves a quote is what the job turns out to involve once we are on site. Opening a wall to reach a junction box that was not accessible from the outside, finding that the existing panel does not have capacity for the circuit being added, or discovering that the wiring behind a failed outlet is in worse condition than the outlet itself: each of those changes what the job covers.
We do not add to the scope without telling you first. If what we find changes the price, that conversation happens before the additional work is done. The scope of the electrical work is priced before it starts, and any change to that scope is priced the same way.
Call (321) 341-6429, describe what is happening, and you will know what the job involves and what it costs before anything is scheduled.
For rental properties in Orlando, the person booking the work and the person providing access are often different people. We handle that coordination on the call: who needs to be there, what the tenant needs to know in advance, and whether the work requires the power to be shut off to part of the unit. After the visit, the landlord or property manager gets a clear account of what was done and what was found, because that record matters for maintenance history and for any code compliance documentation the property needs.
No pressure and no gimmicks, just safe, solid wiring and a clear account of what the visit covered. For property managers handling several units, we work through each address on the call so the scope for each one is settled before any of them are scheduled.
We serve Orlando and the surrounding communities in Orange County, including Conway, Belle Isle, Edgewood, Pine Castle, and Taft. Residential and commercial properties across these areas are within our range, and the same scheduling and pricing process applies regardless of which address is calling.
If your property is nearby and you are not certain whether it falls within our coverage, call (321) 341-6429 and we will confirm before anything is booked.
We check the panel, all visible wiring, grounding and bonding, and GFCI and AFCI protection at the circuits that require it. We document what we find and walk you through it before leaving. If anything needs repair, we explain what it involves and what it would cost before any work is scheduled.
Buyers and their inspectors typically ask about the panel's age and capacity, whether the wiring is aluminum or knob-and-tube, whether GFCI and AFCI protection is in place at the required locations, and whether any previous electrical work was permitted. Having documentation of recent work and a current inspection report answers most of those questions before they are asked.
Older homes often carry wiring that predates current grounding requirements, and some carry aluminum branch-circuit or knob-and-tube systems that require specific handling rather than standard replacement parts. We identify the wiring type during the diagnostic visit and explain what it means for the repair or upgrade before any work is scheduled. Where the scope involves more than a straightforward replacement, we walk through the options on the call so you know what you are agreeing to.
A record of the electrical condition, any recent panel or wiring work, and the GFCI and AFCI protection in place is useful documentation for a landlord. An inspection report that covers the panel and circuits gives the next tenant a baseline and gives the landlord documentation if a dispute arises. We provide a written record of what was inspected and what was found.
Yes. We assess what has already been done, identify what is still needed, and scope the remaining work before starting. We do not assume the existing work is correct, and we flag anything that needs to be redone to bring the job up to code. The price covers what we actually do, starting from where the job stands.
Yes, and that coordination happens on the booking call rather than on the day of the visit. We confirm who needs to be present for access, what notice the tenant requires, and whether the work involves shutting off power to any part of the unit. After the visit, we provide the landlord or property manager with a clear account of what was done, which covers the record-keeping that rental properties typically need.
Call (321) 341-6429 any day from 6:30 AM to 8:30 PM.
On the call, we ask about the symptom, the property type, and what access looks like. By the end of the call, you know what the job involves, what it will cost, and what the next step is.
Call in the morning. Talk it through. Know the options by the end of the call.
See our whole service area. Towns a short way out: Conway, Belle Isle, Edgewood.
Below is a plain look at the electrical work we handle for homes and businesses in Orlando and across Orange County. Each service is described by what it covers, who it fits best, and one practical detail worth knowing before you call. If a job you need is not listed or you are not sure which service applies, call us and we will walk through it with you.
| Type of Work | What the Job Involves | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Whole-Home Generator Installation | Transfer switch installation, Generator circuit wiring, Panel connection and load sizing, Utility back-feed protection | Orlando homeowners preparing for hurricane season and extended outages | The transfer switch prevents the generator from back-feeding the utility line. It is a code requirement, not an optional add-on, and we size the circuit to match the generator output. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Main panel replacement, Subpanel installation, Load calculations and service entrance work | Older homes adding EV chargers, AC loads, or modern appliances that exceed current panel capacity | Many Orlando homes still carry 100-amp service. A load calculation on the call confirms whether an upgrade is needed before any work is scheduled. |
| Wiring & Rewiring | Whole-home and partial rewiring, Aluminum wiring remediation, Knob-and-tube replacement, Garage and workshop wiring | Older homes with degraded insulation, aluminum branch-circuit wiring, or knob-and-tube systems | Partial rewiring that addresses the highest-risk sections first is often the right starting point when a full rewire is not immediately feasible. |
Call (321) 341-6429 and we will walk through the job with you, confirm the scope, and give you a price before anything is scheduled.
(321) 341-6429