MacroElectric is Kissimmee's go-to electrical contractor for homes, rental properties, and local businesses across Osceola County. Whether you are dealing with a tripped breaker at midnight or planning a full panel upgrade before a property sale, we are ready to help. We offer same-day and weekend availability, because electrical problems rarely wait for a convenient moment.
As a family-run electrical business, we take every job seriously, from a single outlet repair to a complete wiring overhaul. Work is performed by licensed electricians who understand code-compliant wiring and know how to get to the root of a problem fast through thorough troubleshooting and diagnostics.
Call (321) 341-6429 for a quote and let us get to work.
Getting your electrical problem handled starts with a quick call. Once we are on-site, the first step is always a proper diagnosis. Skipping straight to a fix without understanding the cause leads to repeat problems, and we do not work that way.
The calls we handle most often include:
Older homes in Kissimmee sometimes have wiring that was never designed to carry today's electrical loads. When breakers trip frequently, it is often a sign the circuit needs attention rather than just a reset. We check for arc-fault and ground-fault conditions, test GFCI and AFCI protection, and give you a clear picture of what is going on before any work begins.
We are available for same-day and after-hours calls when the situation calls for it. Call us and we'll walk you through the fix.
Whether it's a single outlet or a full panel upgrade, we handle it with the same attention to detail. Kissimmee has a mix of newer construction and older neighborhoods where the original electrical service was never meant to power a modern household. If your home is still running on a 100-amp panel and you are adding a major appliance, an EV charger, or finishing a room, the panel needs to keep up.
We handle:
Transparent pricing with no hidden fees on any wiring job means you know the cost before we start. No surprises on the invoice.
Breakers that hold. Outlets that work. Lights that stay on.
Doing electrical work right matters, and we'll help you get it right, whether you are a homeowner updating a kitchen or a landlord keeping a rental property up to code. Outlet and switch work is some of the most common electrical service we perform, and the details matter.
We install and repair:
GFCI and AFCI protection is required in bathrooms, kitchens, garages, and outdoor areas under current electrical code. If your rental property has older outlets in those areas, updating them is a straightforward job that protects tenants and keeps you in compliance.
Ceiling fans make a real difference in Florida's heat, and a properly wired fan with the right circuit is safer and more reliable than a quick swap. We'll handle the wiring so you don't have to.
The sooner you call, the sooner the power is back on, but for wiring projects it also means the sooner we can plan the job properly and get it done right the first time.
We provide wiring services for:
Kissimmee has a healthy market for fixer-uppers and older homes that were built before modern electrical standards. Knob-and-tube and aluminum wiring are fire and liability risks that need to be addressed, not ignored. We assess what is there, explain your options, and complete the work to current code.
Local means we care what the neighbors think. We are accountable to this community, and that shows in the quality of every job we finish. Give us a ring and consider it handled.
Florida's climate creates electrical demands that are genuinely different from most of the country. Hurricane season runs from June through November, and the region consistently ranks among the highest in the country for lightning strikes. Year-round heat puts constant pressure on electrical systems through heavy air-conditioning loads. Backyard pools are common across Kissimmee and the surrounding area, and outdoor living spaces need wiring that holds up to humidity and weather. The services below come up regularly here for good reason.
When a storm knocks out power, a properly installed standby generator keeps the lights on, the refrigerator running, and the household functioning. We handle the electrical side of generator installation from start to finish: running the wiring, installing the transfer switch, and making sure your panel has the capacity to handle the load safely.
A transfer switch is not optional. It is what prevents a generator from back-feeding the utility line and creating a serious hazard. We wire it correctly and make sure the system is grounded and bonded to code. We show up ready to work.
Florida sees more lightning than almost anywhere else in the country, and a single nearby strike can damage or destroy appliances, electronics, and HVAC equipment throughout a home. A whole-home surge protector installed at the panel level is one of the most practical investments a Kissimmee homeowner can make.
We stand behind every circuit we touch, including surge protection installations. Panel-level protection covers the entire home rather than relying on individual power strips, and it works even when no one is home to unplug anything. Call (321) 341-6429 and ask about getting one added to your panel.
Backyard pools and spas are common in Kissimmee, and the wiring that serves them has to meet strict code requirements for good reason. Water and electricity are a serious combination, and the standards around GFCI protection for pool equipment, underwater lighting, and outdoor wet-area circuits exist to keep people safe.
We install dedicated circuits for pool pumps, spa equipment, and hot tubs, and we make sure every outlet and fixture in the area has proper GFCI protection. Pool area lighting is part of the job too, and we wire it to the same code-compliant standard. Call us and we'll walk you through what your setup needs.
Outdoor and Landscape Lighting Security lighting, pathway lighting, and landscape lighting all need properly run exterior circuits that hold up to Florida's humidity and weather. We install outdoor lighting that is wired right and built to last.
EV Charger Installation A Level 2 home EV charger requires a dedicated 240-volt circuit and, in many cases, a panel that can handle the added load. We assess your current service, run the circuit, and install the charger so it is ready to use safely.
Electrical Safety Inspections Whether you are buying a home, preparing a rental for a new tenant, responding to an insurance request, or dealing with an older property that has never been inspected, an electrical safety inspection gives you a clear picture of what is there and what needs attention. We keep you informed from diagnosis to final test.
Experienced electricians. Code-compliant work. Professional service.
We serve residential and commercial customers throughout Kissimmee and the surrounding area, including St. Cloud, Celebration, Poinciana, Buena Ventura Lakes, Harmony, and Intercession City. Whether it is a single-family home, a rental property, a retail space, or a commercial building, we handle electrical work across the region. If you are nearby and need an electrician, we want to hear from you.
Doing electrical work right matters, and so does knowing what it will cost before the job starts. When you call, we talk through what you need, explain what a service call involves, and give you a clear quote before any work begins. There are no hidden fees tacked on after the fact.
We offer same-day availability and weekend scheduling for customers who cannot wait or whose work week does not leave room for a weekday appointment. Work is performed by licensed electricians who arrive prepared, assess the situation thoroughly, and get the job done correctly.
Call (321) 341-6429 to request a quote and get on the schedule. We show up ready to work.
Yes, both are worth taking seriously. Knob-and-tube wiring was not designed to carry today's electrical loads, and aluminum branch circuit wiring has known connection issues that can create fire hazards over time. Many insurance companies flag these systems, and some will not cover a home until they are addressed. We assess what is there, explain your options, and complete the remediation to current code.
Burning smells near an outlet or panel, sparking outlets, a breaker that will not reset and is controlling critical circuits, partial power loss, or any situation where you suspect heat or arcing in the wiring are all worth treating as urgent. We offer same-day and after-hours availability for situations that cannot wait. Call (321) 341-6429 and describe what you are seeing so we can advise you on next steps.
A rewire is usually the right call when the existing wiring is knob-and-tube or aluminum, when the insulation has deteriorated, when the home has had repeated electrical problems that point to systemic wiring issues, or when an insurance company or home inspection flags the wiring as a liability. A partial rewire addresses a specific portion of the home, while a full rewire replaces all the branch circuit wiring. We assess the condition of what is there before recommending a scope.
Breakers that trip frequently and will not hold a load, a panel that runs warm to the touch, breakers that feel loose or do not click firmly into position, a fuse box that has been patched with mismatched fuses, and a panel that hums or buzzes are all signs worth having inspected. An overloaded or failing panel is a safety issue, not just an inconvenience. Call us and we will assess what you have.
An inspection makes sense when you are buying or selling a home, inheriting a rental property, responding to an insurance request, or dealing with an older property that has never been formally assessed. It is also a practical step if you are planning a major renovation and want to know the condition of your electrical system before work begins. We check the panel, circuits, outlets, grounding, and visible wiring and provide written findings.
We assess the existing system, identify what does not meet current code, and explain the corrections needed before any work begins. Some corrections are straightforward, like replacing ungrounded outlets or adding GFCI protection in wet areas. Others, like rewiring a portion of the home or upgrading the panel, are larger projects that we plan and price clearly upfront. All corrections are completed to current electrical code.
Florida's weather can affect scheduling for outdoor wiring and fixture installation, particularly during heavy rain or when lightning is active in the area. We work around the weather to keep projects moving and will communicate with you if conditions require rescheduling. All outdoor wiring and fixtures we install are weatherproofed and rated for Florida's humidity and climate.
We start with the specific problem or area you called about, then assess the related circuits, the panel, and any visible wiring in the affected area. For safety inspections, we go broader and check outlets, grounding, GFCI and AFCI protection, the panel condition, and the visible wiring throughout the home. We explain what we find and give you a clear picture before recommending any work.
Yes, that helps the job go smoothly. Make sure the panel is accessible and not blocked by furniture or storage. If the work involves outlets, switches, or fixtures in specific rooms, clearing the area around them saves time. If you have pets or young children, keeping them away from the work area during the job is also a good idea.
It depends on what is causing the problem. A failing outlet or a single bad breaker can often be replaced cleanly without broader work. But if the underlying cause is aging wiring, an overloaded circuit, or a panel that cannot support the load, patching the symptom without addressing the cause leads to repeat problems and higher costs over time. We will tell you honestly which situation you are in.
An outlet with no power, one that feels warm to the touch, or one with discoloration or scorch marks around the face plate all need to be looked at. Warmth and discoloration indicate heat buildup, which can point to a loose connection, an overloaded circuit, or deteriorating wiring behind the wall. These are not cosmetic issues and should not be ignored.
Yes. When the scope of work requires a permit, we pull it and manage the inspection process. Permit costs are factored into the project estimate so there are no surprises. We handle electrical permit assistance from start to finish and do not leave that responsibility on the customer.
MacroElectric is here when you need electrical work done right in Kissimmee and across Osceola County. We are locally owned, personally accountable, and ready to take your call.
Breakers that hold. Outlets that work. Lights that stay on.
Call (321) 341-6429 for a quote today.
We handle the full range of residential and commercial electrical work in Kissimmee and throughout Osceola County. Whether you have a single dead outlet, an aging panel, or a backyard pool that needs proper wiring, we show up ready to work and get it done right. The table below covers what each service includes, who it is best for, and a practical note to help you plan. Call (321) 341-6429 and we will talk through exactly what your job involves.
| Electrical Service | What It Covers | When You Need It | Things to Know |
|---|---|---|---|
| Electrical Repairs and Troubleshooting |
| homeowners or tenants with an active electrical problem | Same-day availability means you do not have to sit with a safety risk. We trace faults to the source before recommending any repair. |
| Whole-Home Generator Installation |
| Kissimmee homeowners who want to stay powered through hurricane-season outages | Power outages in Osceola County can last days after a major storm. A properly wired standby generator keeps the home livable when the grid goes down. |
| Electrical Safety Inspections |
| buyers, sellers, landlords, and anyone inheriting an older property | We keep you informed from diagnosis to final test. Landlords use our inspections to stay ahead of code issues before they become violations. |
| Wiring and Circuit Installation |
| older homes with knob-and-tube or aluminum branch wiring, and new builds or remodels needing rough-in | Older wiring that no longer meets current safety standards is a common find in Osceola County homes. We bring it up to code and document the work. |
| Pool and Spa Wiring |
| Kissimmee homeowners with existing or new backyard pools and hot tubs | Pool and spa wiring code requirements exist for serious safety reasons. Every connection is tested and inspected before the water goes in. |
| Lighting Installation |
| homeowners remodeling, landlords improving curb appeal, and commercial tenants fitting out a space | Good exterior lighting improves safety after dark and adds value to a property. LED upgrades pay for themselves over time. |
| Electrical Panel and Service UpgradesMost Popular |
| homes adding load, older panels that cannot keep up, or properties preparing for an EV charger or generator | We run a load calculation before any upgrade and pull the required permits. Transparent pricing means you know the cost before we start. |
| Ceiling Fan Installation and Replacement |
| Florida homeowners looking to reduce cooling costs year-round | When existing wiring is not in place, we run a new circuit and install the fan correctly rather than rigging a workaround. |
| Dedicated Appliance Circuits |
| homeowners adding a major appliance, home workshop, or EV charger | We check panel capacity before running any dedicated circuit and upgrade if needed. Getting the load calculation right protects both the appliance and the panel. |
| Outlet and Switch Installation |
| homeowners upgrading convenience features or replacing failed devices | Kitchens, bathrooms, garages, and outdoor locations require GFCI protection by code. We check and install to current requirements. |
| Breaker and Fuse Repair |
| homes with breakers that will not hold or fuse boxes that need attention | Repeatedly resetting a tripping breaker without diagnosing the cause can damage wiring and create a fire risk. Call us first. |
| Surge and Lightning Protection |
| any Kissimmee homeowner, given Central Florida's high lightning strike frequency | A single nearby strike can destroy appliances and the panel itself. A whole-home surge protector installs at the panel and intercepts damaging voltage before it reaches your devices. |
How do I know if my home needs a panel or service upgrade?
Common signs include breakers that trip frequently and will not hold, lights that dim when a large appliance kicks on, a panel that feels warm to the touch, or a fuse box that has not been replaced with a modern breaker panel. If you are adding an EV charger, a standby generator, or a major appliance, we run a load calculation to confirm whether your current service can carry the additional demand. Call us and we will walk you through what the inspection involves.
What causes a breaker to keep tripping?
A breaker that will not hold is usually telling you one of three things: the circuit is drawing more current than it is rated for, there is a fault somewhere on the wiring, or the breaker itself is worn and failing. Repeatedly resetting without diagnosing the cause can damage wiring and create a fire hazard. We trace the problem to the source before recommending any repair or replacement.
Is the electrical work permitted and inspected?
For work that requires a permit under Florida and local code, yes. We handle permit pulling and coordinate inspections as part of the job. Panel upgrades, service changes, new circuits, and most rewiring projects fall into this category. We let you know upfront what the permitting process involves and what it adds to the timeline.
Same-Day and Emergency Availability
Electrical problems do not keep business hours. We offer same-day and after-hours appointments for repairs and urgent work throughout Kissimmee and Osceola County.
Is older wiring in a Kissimmee home a safety concern?
It depends on the type and condition. Knob-and-tube wiring and aluminum branch wiring are both found in older homes in Osceola County, and both carry risks that modern wiring does not. Knob-and-tube lacks a ground wire and is not compatible with today's electrical loads. Aluminum branch wiring can loosen at connections over time and create heat and fire risk. A safety inspection tells you what you have and what, if anything, needs to be addressed.
What does an EV charger installation involve?
A Level 2 home charger requires a dedicated 240V circuit sized for the charger's amperage rating. We assess your panel first to confirm it has the capacity to support the new circuit. If it does not, we handle the panel upgrade as part of the same project. We install the circuit, mount the charger, and test the setup before we leave. The result is a full overnight charge rather than the slow trickle you get from a standard wall outlet.
How does backup generator hookup work?
We connect the generator to your home's electrical system through a transfer switch, which safely isolates your home from the utility grid when the generator is running. This is required by code and protects both your home and utility workers. We handle all the panel and circuit work involved and make sure the installation meets local requirements. We do not size or sell the generator unit itself, but we work with what you have or what your supplier is providing.
Transparent Upfront Pricing
We give you a clear quote before any work begins. There are no hidden fees added after the fact, and we walk you through any change to the estimate before we proceed.
Do I need to be home during the electrical work?
For most jobs, yes. We need access to the panel, the work area, and often multiple rooms. For larger projects like a panel upgrade or rewiring, plan to be available for the duration. If your situation makes that difficult, call us and we will talk through what access we actually need so we can schedule around your day as much as possible.
How does pricing work, and will I get a quote before work starts?
Yes. We give you a clear quote before any work begins so you know what the job costs upfront. There are no fees added after the fact. For jobs where conditions in the wall or panel affect the scope, we identify those before work starts and walk you through any change to the estimate. The more detail you can share when you call, the more accurate the number we can give you over the phone.
Work Performed by Licensed Electricians
Every job, whether it is a single outlet or a full service upgrade, is handled by licensed electricians who know the code requirements and take the work seriously.
What do warm or buzzing outlets mean?
A warm outlet usually means a loose connection, an overloaded circuit, or a failing device. A buzzing sound can indicate arcing inside the outlet or wiring. Both are worth acting on quickly. Turn off the circuit at the breaker and call us. Do not continue using an outlet that feels warm or makes noise.
What is GFCI protection and where is it required?
A GFCI outlet monitors the flow of current and shuts off power within milliseconds if it detects an imbalance, which can happen when electricity finds a path through a person. Florida code requires GFCI protection in kitchens, bathrooms, garages, outdoor locations, and anywhere near water, including pool and spa areas. If your home has standard outlets in these locations, we can upgrade them to GFCI during a service call or inspection.
How does whole-home surge protection work, and is it worth it in Central Florida?
Central Florida sees more lightning strikes than nearly anywhere else in the country. A whole-home surge protector installs at the panel and intercepts voltage spikes before they reach your appliances, electronics, and wiring. Point-of-use power strips offer minimal protection against a direct or nearby strike. For most Kissimmee homeowners, a panel-level surge protector is one of the most cost-effective electrical upgrades available.
Call (321) 341-6429 and we will talk through what your job involves, give you a straight answer on the cost, and get you on the schedule.
(321) 341-6429